Clone RFID Sticker ye mun ye ani a bɛ baara kɛ cogo di bi lakana siratigɛ la?

Duplicateur dɔ bɛ bip kɛ ani ekran b’a fɔsɛbɛnni kɛ ka ɲɛ. O stika bɛ taa telefɔni dɔ kɔfɛ. Da la, kalanden tɛ foyi kɛ: bip tɛ, LED tɛ, log don tɛ. Kunnafonidila jɔlen bɛ yen ni fɛn dɔ ye min sɛgɛsɛgɛra ka ɲɛ a miniti tan ye nin ye.

 

Nin ye dɛmɛn bileti ye min ka teli ka sɔrɔ sannikɛlaw fɛ minnu bɛ duplication (dupliki) feere kokura, wa a bɛ se ka fɔ ko a bɛ se ka kɛ ko kopikɛla ye min kɛ tigitigi, a tun ka kan ka min kɛ. O la ɲininkali nafama min bɛ clone RFID sticker kan, o tɛ ko sɛbɛnni in kɛra baara ye. O ye fɛn wɛrɛ ye min tun ka kan ka kɛ tiɲɛ ye walasa o sɛbɛn ka kisi taama ma ka bɔ banbali la ka taa da la.

 

 

 

 

Kumadenclone (kloni) yebɛ a dogo ko fɛɛrɛbɔ sira fila bɛ a jukɔrɔ minnu tɛ ɲɔgɔn ta, wa k’u ɲagami, o de ye sɔrɔyɔrɔko bɛ tiɲɛ yɔrɔ min na fɔlɔ.

 

125 kHz seereyaw minnu ka dɔgɔ-frequency, o kɔrɔ ye ko EM4100/TK4100 denbaya min bɛ sɔrɔ legacy access control kɔnɔ, olu bɛ ɲɔgɔn ta ni ID kura sɛbɛnni ye T5577 walima EM4305 puce kɔnɔ walasa a ka original ka danyɔrɔ jira. High-frequency 13.56 MHz seereyaw minnu sinsinnen bɛ MIFARE Classic kan, olu bɛ baara kɛ cogo wɛrɛ la. Danfara kɛrɛnkɛrɛnnen bɛ balo bloki 0 kɔnɔ, min bɛ puce standard kan, o bɛ kalan-dɔrɔn, o la, UID RFID stika min bɛ se ka Changé, o de wajibiyalen don sani duplication ka se ka kɛ hali dɔɔnin. Cikan min bɛ nin denbaya fila ninnu jaabiw sigi senkan olu sɛbɛnnen don ka ɲɛ da wulilen-sɔrɔ ɲinini jɛkulu fɛ min bɛ Proxmark baarakɛminɛnw mara (RfidSɛgɛsɛgɛli Jɛkulu), ani HF fiɲɛbɔlan yɛrɛ ɲɛfɔlen don ISO/IEC 14443 kɔnɔ.

 

Sannikɛla fɛ, bamanankan bamanankan ka surun: a kɛcogo ka kan ka bɛn kalanden ma sanni ɲininkali wɛrɛ ka kɛ fɛn ye.

 

O kumasen ye tiɲɛ ye wa mɔgɔ fanba bɛ jɔ yɔrɔ min na fana, o de y’a To batch caman bɛ Dɛsɛ hali bi frequency checks out kɔfɛ. Ni i ye frequency (fɔkan) bɛn ɲɔgɔn ma, o bɛ stika (stika) dɔrɔn de don baro la. Ni kalanden bɛ Sɔn a bɛ min Mɛn o kɔ fɛ, o bɛ Bɔ puce (puce) jaabi cogoya la, wa o ye filɛri danfaralen ye, min bɛ Kɛ ni fɛnɲɛnamafagalanw ye i tɛ minnu Kɔrɔsi. Ni laɲini siratigɛ bɛ baara kɛ ni 13,56 MHz ye, UID-cogo ni kalanden-taamacogo ɲininkaliw nafa ka bon ka baara kɛ u yɛrɛ ye sanni misali si ka tigɛ (MIFARE-kalasi sɔrɔcogo sɛbɛnw).

 

 

Nin ye fɛn caman sɛgɛsɛgɛli ye min b’a latigɛ ni RFID stika komandi min bɛ se ka kɛ klon ye, o bɛ boli ni dususuma ye walima ni a bɛ wuli ka kɛ dɛmɛn sira banbali ye, wa a man teli ka bɔ spec sheet kan hali dɔɔnin: HF puce "magic" bɔnsɔn.

Gen1a puwɛntiw bɛ kɔfɛda lawulili cikan kɛrɛnkɛrɛnnen de wajibiya sani bloki 0 ka se ka sɛbɛn kokura. Gen2 puwɛntiw ye sɛbɛnni tilennen ye- ani ka sɔn sɛbɛnni cikan gansan ma min tɛ tugu ɲɔgɔn kɔ kɛrɛnkɛrɛnnenya la. Siɲɛ kelen-sɛbɛnni kalanw i n’a fɔ FUID bɛ kɔfɛda cikan jaabi dabila bloki 0 sɛgɛsɛgɛli fɔlɔ kɔfɛ, o min bɛ kopi datugu kudayi. Aw bɛ 5000 ci kiliyan dɔ ma yɔrɔ min na 3000 ye Gen1a ye ani 2000 ye Gen2 ye, wa n’u ka porogaramukɛyɔrɔ bɛ kɔfɛda sinsinni dɔrɔn bɔ, Gen2 yɔrɔ bɛ kɛ scrap ye a selen na : a tɛ tiɲɛ, a tɛ se ka porogaramu dɔrɔn ni u ka minɛnw ye. O ye jateden duuru-sɛbɛnni-bɔlen ye min bɛ sɔrɔ layini dɔ fɛ sannifeeresɛbɛn kan, mɔgɔ si ma min fa.

 

Puce kalasi	Bloki 0 sɛbɛnni fɛɛrɛ	Se-sɛbɛnni fɔlɔ kɔfɛ	Typique sannikɛla bɛ bɛn
Gen1a ka majigi	Kɔfɛda kununni-kumakan cikan	Ɔwɔ, siɲɛ caman	Baarakɛlaw ni Proxmark-klasi baarakɛminɛnw
Gen2 ka maji	Sɛbɛnni tilennen, cikan jɔnjɔn	Ɔwɔ, siɲɛ caman	Baarakɛminɛn ɲagaminenw, Android-baarakɛcogo minnu sinsinnen bɛ
FUID / siɲɛ kelen-waati	Backdoor, fɔlɔ ladilan dɔrɔn	Ayi, a bɛ da tugu sɛbɛnni fɔlɔ kɔfɛ	Baarakɛminɛn minnu ka kan ka re-cloning bali duguma

 

Dɛsɛcogo filanan bɛ yen, min ka surun kosɛbɛ, min nafa ka bon ka dɔn. Magic chips fɔlɔw tun bɛ ni fili ye u bɛ foro lafiɲɛbɔ surun in ɲɛnabɔ cogo min na ISO 14443-2 bit waati kɔnɔ. Karti lakika tun bɛna jɔ yɔrɔ min na, majigi karti dɔw bɛna taa ɲɛ, o kɔfɛ, kalandenw tun bɛ kuraya ni filɛriw ye minnu bɛ o kɛcogo tigitigi de bolonɔ bila, o min labanna k’o puwɛntiw gɛn ka bɔ baara la. Feerekɛla dɔ fɛ, a kɔlɔlɔ bɛ se kɔfɛ : RFID stika kulu min bɛ se ka kɛ clone ye, n’o bɛ tɛmɛ kɔrɔbɔli bɛɛ la bi, o bɛ se ka ban makun na kalanbaga fɛ min sɛgɛsɛgɛra ni firimiwɛri ye, kalo tan ni segin o kɔfɛ, waati jan fatura jɛlen kɔfɛ.

 

Fɛn dilanbaga si tɛ se ka layidu ta kalanden dilannikɛla ka firimiwɛri kɛcogo nataw la, wa mɔgɔ o mɔgɔ bɛ o kɛ, o bɛ jateminɛ kɛ. I bɛ se ka min kɛ, o ye bɛnkansɛbɛn ye sanni ka kɛ fɛɛrɛko ye, wa a bɛ jigin fɛn naani na. Puce yɔrɔ nimɔrɔ tigitigi labɛn PO kɔnɔ sanni ka sɔn "MIFARE-compatible" ma. A ɲini ka lot nimɔrɔw sɛbɛn walima ka sɛbɛn kartɔn kelen kɔnɔ, o la gɛlɛya kulu dɔ bɛ se ka bɔ ɲɔgɔn na sanni ka hakili jigin san kelen bɔli la. Aw bɛ fɛnw mara minnu datugulen don ka bɔ lot kelen-kelen bɛɛ la fan fila bɛɛ la. Ani ka kɔn ka bɛnkan sɔrɔ jɔn bɛ segin ka -sɛgɛsɛgɛli kɛ ani jɔn bɛ musaka minɛ ni kiliyan dɔ ka kalanden ka firimiw ye fɛn caman Changé mid-kontra. O si tɛ fɛn wɛrɛ ye. O ye wale ye min bɛ kɛ cogo la min bɛ kɛ ni fɛn o fɛn ye min bɛ kɛ ka kɛɲɛ ni sariya ye, wa o de bɛ ko kɛlen dɔ faranfasi min bɛ se ka tugu ɲɔgɔn kɔ ni sɔsɔli ye. Chip denbaya minnu bɛ o desizɔnw kɔfɛ, anw de ye olu kelenw de yeka duplication-grade fobs ni stickers jɔ ka lamini, o de y’a to yɔrɔ nimɔrɔ bɛ kɛ komandi kan sanni ka kɛ feereli baro la.

 

Jaan fitinin dɔ bɛ Sìgi sɛbɛnnibolo yɛrɛ kɔnɔ. Bayt min bɛ tugu UID kɔ, o ye BCC sɛgɛsɛgɛli ye, UID bayt naani ka XOR, ani ka nafa tiɲɛnen sɛbɛnni soft-bricks chip. Kan min ka bon-volume line min bɛ jigin ka ɲɛsin scrap rate ma, o min ye sababu wɛrɛ ye batch consistency ye fɛn dilanni ɲininkali ye sanni ka kɛ chance ko ye.

 

 

Industri degun b’a fɔ ko stika ye stika ye wa fɛn kelen min bɛ fɛn caman sɛmɛntiya o ye cɛmancɛ ni nɔrɔli ye. Dɛsɛ min bɛ mɔgɔ hakili ɲagami kosɛbɛ nin fura suguya in na, o b’a fɔ ko o tɛ. Aw bɛ baarakɛ-stika dɔ bɔ kɛsu dɔ la, k’a bila telefɔni kɔfɛ walima nɛgɛdaga dɔ kan, o la, a yɔrɔ bɛ bin walima ka tunun. Puce (puce) bɛ ka ɲɛ. Fɛnɲɛnɛmako Yɛlɛmana.

 

 

Fix ye ferrite isolation layer ye stika ni nɛgɛ cɛ, min bɛ baarakɛyɔrɔ segin a cogo kɔrɔ la ni a bɛ flux to conductive surface kɔnɔ. Nka anti metal RFID sticker access control deployment dɔ mago bɛ hali bi desizɔn na sanni ka kɛ checkbox ye, wa dan bɛ nin cogo in na. Ni laɲini kalanni yɔrɔ ka surun, o kɔrɔ ye ko kogo kalanbaga min baarakɛla bɛ a digi k’a ɲɛsin a ma, a sigiyɔrɔma seginni dɔrɔn ka teli ka yɔrɔ caman sɔrɔ ka sɔrɔ feriti si tɛ yen fewu. Ni stika ka kan ka baara kɛ batiri modulu dafalen dɔ kan walima nɛgɛdaga dɔ kan, feriti tɛ fɛn ye min bɛ se ka kɛ, wa a bonya nafa ka bon. Kɔnɔnafilila minnu bɛ i n’a fɔ Laird, olu bɛ sɛbɛnfura janya dantigɛlenw bɔ milimɛtɛrɛ 0,05, 0,1 ani 0,2 ye nin baarakɛcogo suguya in na, ni milimɛtɛrɛ 0,3 bɛ sɔrɔ ɲinini senfɛ, wa o hakɛ laban finman bɛ teli ka baara kɛ ka dɔgɔn-kHz 125 kHz la yɔrɔ min na flux hakɛ ka bon. Fiɲɛ danfara dɔrɔn de ka jugu diɲɛ fila bɛɛ la: a bɛ fɛn caman fara a kan kabini waati jan sani a ka yɔrɔ dɔ fara a kan.

 

O de y’a To min bɛ Se ka Lase yan, o ye sumanikɛlan ye sanni ka Kɛ ‘fɔli ye. Santimɛtɛrɛ dafalen jatew bɛ taa cogo jugu la porozɛw ni ɲɔgɔn cɛ, bawo sigida min bɛ wele ko inductively coupled system, o kɔnɔ, plafond bɛ sigi kalanden fɛ : sariya nafama dɔ ye ko maximum range bɛ jigin ni kalanden antɛni cɛmancɛ ye siɲɛ kelen fo siɲɛ fila ɲɔgɔn. Fɛn min bɛ taama Kɛ o ye ratio (hakɛ) ye. Tablo min bɛ duguma, o ye sɔnni anwɛlɛki ye an bɛ baara kɛ min na stika jɔli kan, min bɛ jira ka kɛɲɛ ni batch kelen-kelen bɛɛ yɛrɛ ka bare-surface baseline ye:

 

Montage cogoya	Sojɔ	Jateminɛ makɔnɔnen vs basigi	Kiiritigɛ
Bare non-nɛgɛ surface	Standard 0,9 mm stika	100% ka kɛɲɛ ni ɲɛfɔli ye. Militiri 25–30 warijɛ stika kan min bɛ kogo kalanbaga danma dɔ kan o bɛ sigi santimɛtɛrɛ 1–10 bandi bɔlen duguma dakun na	Reference ka ɲɛsin batch ma
Nɛgɛ plati, contact direct	Standard 0,9 mm stika	Zeru kɛrɛfɛ, a ka c’a la, kalan tɛ kɛ fewu	Aw kana nin jɔli in fɔ
Nɛgɛdaga dɔ	Stika + 0.2–0,3 mm ferite	60–80%	Sɔn ka tɛmɛ walima ka bɛn 60% ma .
Telefɔni kɔfɛ, batiri sanfɛ	Standard 0,9 mm stika	Zeru kɛrɛfɛ	Aw kana nin jɔli in fɔ
Telefɔni kɔfɛ, a da la, a jɛlen don ka bɔ chargement coil la	Stika + 0.2–0,3 mm ferite	40–70%, o bɛ danfara ka kɛɲɛ ni telefɔni minɛnw ye	Sɔn ka tɛmɛ walima ka bɛn 50% ma telefɔni suguya saba kɔnɔ

 

Aw bɛ nin boli siɲɛ kelen aw yɛrɛ ka kalanden kan ani ka modɛli ni antɛni cɛmancɛ sɛbɛn jatedenw kɛrɛ fɛ. O sɛbɛn kelen bɛ jaabi fanba di, kiliyan bɛna min ɲini, a kalo fɔlɔ la, a daminɛ na. Wa ni telefɔni-mount constraint y’a jira ko a tɛ ko nafama ye, keyfob so dɔ bɛ gɛlɛya bɛɛ kɛrɛfɛ, o min nafa ka bon ka pese sani i ka i yɛrɛ bila sticker form factor dɔ la hali dɔɔnin (fob sugandili ka ɲɛsin dondaw kɔlɔsili porozɛw ma).

 

 

 

Dan gɛlɛn bɛ nin kulu in na, wa ka kɛ mɔgɔ tilennen ye a ko la, o ye ka kɛ feerekɛla dannamɔgɔ ye. Sɛbɛn minnu sirilen don i n’a fɔ DESFire EV3, SEOS, ani bi MIFARE bɔnsɔnw, olu dabɔra kɛrɛnkɛrɛnnenya la walasa ka ɲɔgɔndanbaliya bali, wa sisan kalanden caman bɛ ban u kopiw la k’a jɛya. Fɔcogo kɔrɔw, minnu ma siri, olu dɔrɔn de bɛ se ka kɛ ɲɔgɔn fɛ. Suguba bɛ ka taa o cogo la ni laɲini ye : sɔrɔli-kunnafoni kalanbagaw bɛ ka wuli ka bɔ gɛrɛɲɔgɔnna kartiw la minnu ka dɔgɔ-, minnu bɛ kopi kɛ nɔgɔya la, ka taa hakilitigiw ka seereyaw sirilenw na ani fɛn caman -factor authentication da la (360iSɛgɛsɛgɛli). RFID stika min bɛ kɛ ɲɔgɔn fɛ, min bɛ kɛ ka dondaw kɔlɔsi, o basigilen bɛ ka dɔgɔya min bɛ se ka ladɛrɛsi kɛ, wa k’a kɛ i n’a fɔ a tɛ o cogo la, o tɛ sannikɛla si dɛmɛ.

 

"Bɛn" fana tɛ "mankan" kɔrɔɲɔgɔnma ye. Tuma min na ɲininikɛlaw ye FM11RF08S sɛgɛsɛgɛ, n’o ye puce ye min bɛ feere kosɛbɛ i n’a fɔ MIFARE Classic-a bɛ se ka kɛ a nɔnabila ye, u ye fɛnɲɛnɛma kɔkanda dɔ sɔrɔ min bɛ se ka sɔrɔ karti-dɔrɔn binkanni fɛ, min bɛ se ka baarakɛla-kilisi ɲɛfɔlenw bɔ kɛnɛ kan (Quarkslab, CyberInsider fɛ).

 

O la sa, sannikɛla ka kan ka mun kɛ n’o ye? Fɛn saba, u bɛɛ bɛ se ka sɛgɛsɛgɛ ka bɔ i ka tabali fan fɛ. Aw ye puce yɔrɔ nimɔrɔ ɲini ani die feerela tɔgɔ fɛ sanni ka denbaya ɲini, bawo "MIFARE-compatible 1K" bɛ puce tan ni fila ɲɛfɔ minnu ka lakana tariku tɛ kelen ye. Aw ye ɲininkali kɛ ni feerekɛla bɛ a yɛrɛ ka puwɛntiw siri walima ni a bɛ inlay dafalenw san, bawo izini min bɛ a yɛrɛ ka puwɛnti-bonding line baara, o bɛ IC lotw sɔrɔ k’a ɲɛsin i ma, wa a bɛ se k’a fɔ i ye batch dɔ bɔra yɔrɔ min na, k’a sɔrɔ jagokɛyɔrɔ min bɛ inlays feere kokura, a ka c’a la, o tɛ se. Ani k’a ɲininka mun bɛ kɛ ni die feerela dɔ ye forobaciyɛn sɔrɔ bɛnkansɛbɛn cɛmancɛ la: jɔn bɛ se ka kɛ a nɔnabila ye, ani jɔn ka waati bolodalen na. Fɛn dilanbaga min ye miiri o la, o bɛna jaabi di kumasen dɔ kɔnɔ. Min ma o kɛ, o bɛna barokun Changer ka kɛɲɛ ni sɔngɔ ye. O hakilina kelen de bɛ seereyaw lakanani bɛ ɲɛfɔ cogo min na jatigila porozɛw la, yɔrɔ min na...lakana miirili minnu bɛ lotɛli kilisi kartiw kɔfɛu ka teli ka jateminɛ kɛ kosɛbɛ ka tɛmɛ sigiyɔrɔ baara kan.

 

 

Ni kopi dɔ yedagalena bɛ se ka fɔ ko foyi tɛ a la ni a bɛ tenfɛɛrɛko siratigɛ la, a bɛ se ka kɛ. Tuma caman na, donko seereyaw bɛ jate i n’a fɔ fɛn min bɛ kɔrɔsi sanni ka kɛ mɔgɔ yɛrɛ ka fɛnw ye, wa o cogoya bɛ sɔrɔ sow jatew kɔnɔ, kondo sariyaw kɔnɔ, ani HOA ka sariyaw kɔnɔ. Sira min yamaruyara ka taa seere dɔ wɛrɛ la, a ka c’a la, o ye boon yɛrɛ ka bɔli ye, yɔrɔ min na, kopi kura bɛ sɛbɛn ani kɔrɔlen bɛ se ka bɔ yen ka jateminɛ kɛ (Nimbio ye). Ni i y’a sugandi ka kilisi dɔ kopi kɛ clone RFID stika la o kɛcogo kɔkan, o bɛ gɛlɛya dɔ ɲɛnabɔ ani ka jatebɔ danfara don, bawo a bɛ se ka kɛ ko ɲɛmɔgɔw t’a dɔn ko seere wɛrɛ bɛ yen.

 

An bɛ jagokɛlaw di minnu bɛ baara kɛ o karamɔgɔya yamaruyalen kɔnɔ: dakunw dilannikɛlaw, seereyaw-duplication services, systems integrators, ani property operators minnu bɛ seereyaw di kokura u yɛrɛ ka lokatɛriw ma. An tɛ fɛn di min dabɔra ka se sɔrɔ lakana sira dɔ kan, ani k’a fɔ k’a jɛya ko o ye fɛn ye sanni ka kɛ jalaki bɔli ye.

 

A bɛ kɛ fana k’an ka kiliyan ɲumanw ɲɛfɔ. Sannikɛla minnu b’a dɔn kaban u yamaruyalen don ka seereyaw minnu lasegin, ani minnu bɛ se k’u sɛbɛn, olu de bɛ sɔrɔyɔrɔ ɲininkaliw kɛ tilayɔrɔba nata kɔnɔ, bawo u ka farati tɛ sariya siratigɛ la. O ye batɛmu ye min tɛ baara Kɛ.

 

 

Sɔrɔko gɛlɛya fanba minnu bɛ nin kulu in kɔnɔ, olu bɛ se ka bali sanni-komandi waati la. Fɛn wɔɔrɔ ka kan ka pinɛ duguma ko lisi jenɛriki bɛ to ka panpan, wa OEM cloneable RFID sticker feerela gɛlɛn o gɛlɛn ka kan ka o wɔɔrɔ bɛɛ jaabi k’a sɔrɔ a ma hedging kɛ: puce yɔrɔ nimɔrɔ tigitigi ani a die source majigin bɔnsɔn, min fɔra k’a jɛya ko waati kelen-sɛbɛnni-sɛbɛnni ni sɛbɛnni seginni; diamètre anikasabia janya ka fara ferite layini suguya bɛɛ kan; nɔrɔlan hakɛ ani a bɛ jate minɛ substrat min na; sɛgɛsɛgɛlifɛnw bɔlenw, kɔrɔ ye siɲɛ caman, kalan yɔrɔjan ani kunnafonidilanw dafalen, ni dafalen hakɛ ye; ani lot traceability.

 

Lisiti ye tilancɛ nɔgɔn ye. Tiɲɛ na, tilancɛ min bɛ RFID sticker cloneable wholesale order lakana tiɲɛ na, o ye k’a dɔn jaabi barikama kɔrɔ ye min ye ani ka min kɛ o la.

 

Ni feerekɛla ye puce (puce) didenbayasanni ka kɛ yɔrɔ nimɔrɔ ye, o kɔrɔ ka teli k’a jira k’u bɛ inlays dafalenw san, wa u tɛ die kɔrɔsi. Baara bɛ se ka kɛ farati hakɛ dɔgɔman na-, nka i ka bɛnkan ɲininkaliw kɛli dabila u tɛ se ka minnu jaabi, ani ka baara kɛ ni i yɛrɛ ka sɛgɛsɛgɛli dontaw ye. N’u ma se ka majigi bɔnsɔn fɔ, u k’a miiri ko batɛmu ɲagaminen don ani ka ban a la walima ka sɔngɔ kɛ sɛgɛsɛgɛli kɛcogo dɔ la. Ni sɛgɛsɛgɛli bɔli ɲɛfɔra ko "sampling" ni hakɛ tɛ, aw bɛ hakɛ ni AQL ɲini; feerekɛla min bɛ 100% sɛgɛsɛgɛ, o bɛna o fɔ o yɔrɔnin bɛɛ, bawo o bɛ wari bɔ u la, wa u b’a fɛ ka juru sɔrɔ o la. N’u ma se ka lot nimɔrɔw di, cogo si t’i bolo ka batch jugu dɔ bɔ ɲɔgɔn na kɔfɛ, o min ye fɛn kelen ye min sɔngɔ ka gɛlɛn kosɛbɛ nin lisi in kan ka sɔrɔ tiɲɛ kɔfɛ. Wa ni janya min fɔra, o bɛ feriti layini bɔ a la, i yɛrɛ ka segin ka misali suman, bawo o danfara de bɛ telefɔni-mount porozɛ tigɛli kɛ segin ye.

 

An fan fɛ o ɲininkali ninnu jaabi jɔnjɔnw bɛ sɔrɔ bawo taabolo bɛ kɔlɔsi a laban na ka taa a laban na : nɛgɛ-antɛni sirili min bɛ minɛ fo milimɛtɛrɛ ±0,1 ɲɔgɔn, so kɔnɔ puwɛnti sirili don o don seko la ba kɛmɛ caman na, ani 100% sɛgɛsɛgɛli bɔli sanni ka kɛ misali ta ye. O ±0,1 mm ye frequency spec ye min bɛ a yɛrɛ dogo. Coil geometry bɛ inductance (inductance) sigi, inductance (inductance) bɛ tag (tag) bɛ resona yɔrɔ min na, ani resonant point (yɔrɔ) min bɛ yaala-yaala unit to unit kɔrɔ ye ko batch kɔnɔ yɔrɔ dɔw bɛ sigi ka surun kalanden ka tolerance window da la ka tɛmɛ dɔw kan. Olu ye yɔrɔw ye minnu bɛ kalan tuma ni tuma da la k’a sɔrɔ ciden tɔ bɛ a yɛrɛ minɛ, wa olu fana de ye sababu yeka misali dɔ tiɲɛ ka kɛɲɛ ni kalanden laɲinilen ye sani i ka i yɛrɛ bila hakɛ labɛ dɔgɔkun fila musaka bɔ. Ni aw ka poroze mago bɛ foroko, a janya, walima feriti jɔli la min tɛ katalogu standard kɔnɔ, o ye abaarakɛminɛnw ni taabolo ɲininkali an bɛ min ɲɛnabɔ -so kɔnɔsanni ka kɛ sɔrɔyɔrɔko degeliw ye.

 

 

An ka jɛɲɔgɔnya jan dɔ ye ni Faransi ka tɔn dɔ ye min bɛ boon-sɔrɔ-seereyaw fila-fila sugu sanfɛ. San duuru kɔnɔ u ye kopi fob 500.000 ɲɔgɔn ta an fɛ san kɔnɔ, wa desizɔn min y’a to a kɛra baara ye, o tun tɛ sɔngɔ ye.

 

U ye waati kelen-sɛbɛnni FUID puce dɔ ɲɛfɔ sanni ka kɛ magic puce ye min bɛ se ka sɛbɛn kokura dan tɛ. O kun tun ye jago ye. Ni seere dɔ bɔra u ka jatebɔyɔrɔ la dɔrɔn, u tun b’a fɛ a ka kɛ ko a tɛ se ka kɛ kiliyan laban fɛ, walima mɔgɔ o mɔgɔ bɛ duguma, k’a sɛbɛn kokura ka kɛ fɛn wɛrɛ ye, k’o sɔrɔ ka taa u ka taamasiyɛn na. An ye baarakɛminɛn kuraw fana tigɛ walasa u ka fow ka u yɛrɛ ka taamasiyɛn ta, o min ye o gɛlɛya kelen in tilancɛ tɔ datugu : kopifeerelaw bɛ sow jenɛriki tɛmɛn k’u kɛ u ka fɛn dilannen ye. San duuru ni unit miliyɔn 2,5 ɲɔgɔn o kɔfɛ, puce-generation ɲininkali ma segin abada i n’a fɔ dɛmɛko, bawo a jaabi dira siɲɛ kelen, sɛbɛn kɔnɔ, sanni komandi fɔlɔ ka kɛ.

 

O de ye sɔsɔli bɛɛ ye min bɛ kɛ ka clone RFID stika minɛ i n’a fɔ fɛn ɲɛfɔlen sanni ka kɛ jagofɛn ye. N'i b'a fɛ ka baara kɛ o jago-offs kelenw fɛ i yɛrɛ ka volume kama, ka puce generation, thickness, ferrite build ani test coverage datugu, an ka injiniyɛriw bɛna o kɛ ka kɛɲɛ ni sample lakika ye anispec sheet sanni i ka i yɛrɛ bila baarakɛminɛnw na.