Custom ID Cards Sannikɛla ka gafe

ID karti minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani Badge minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye: Sannikɛlaw ka gafe min bɛ se ka baara kɛ

 

 

Nin gafe in sɛbɛnna mɔgɔw ye minnu bɛ u bolonɔ bila tiɲɛ na nin yamaruya ninnu na: sannifeere, HR, yɔrɔw, IT lakanani, lakɔli ni dɔgɔtɔrɔso ɲɛmɔgɔw, ani ko kɛtaw jɛkuluw. A bɛ taama kɛrɛnkɛrɛnnenya la latigɛw la minnu nafa ka bon sani sɛnɛ ka daminɛ, wa a bɛ tiɲɛ fɔ yɔrɔ min na "a bɛ bɔ i ka feerekɛla de la" ye jaabi ɲuman ye.

 

ID kartiw ni mɔgɔ yɛrɛ ka ID kartiw: Danfara jumɛn bɛ u ni ɲɔgɔn cɛ?

 

O daɲɛ fila bɛ baara kɛ ɲɔgɔn fɛ, nka u bɛ baara suguya wɛrɛw ɲɛfɔ, wa danfara bɛ fɛn caman Changer i ka kan ka min labɛn.

 

A karti min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago yebɛ kɛ ka kɛɲɛ ni mɔgɔw sago yeɲɛnabɔlihakɛya. Logo, a labɛncogo, a kulɛri, a kɛcogo ani a puce suguya bɛ labɛn ka ɲɛsin batch bɛɛ ma. Mɔgɔw ​​ka kartiw, don karti lankolonw, ani taamakɛlaw ka kartiw ka teli ka kɛ "laada" ye k'a sɔrɔ u ma kɛ mɔgɔ kelen-kelen bɛɛ ye. Walasa k’u komandi i mago bɛ seko ni dɔnko baara ni fɛn ɲɛfɔlenw na kosɛbɛ. N’i ​​bɛ ka dantigɛli sɛbɛn sɛbɛnnen dɔ pese ni doncogo taamasiyɛn gansan ye, jagokɛcogo waleyali-dafalenw bɛ dafa nin sangaɲɔgɔnma in naIC kartiw ni ID kartiw.

 

A ID badge min bɛ kɛ mɔgɔ yɛrɛ ta yebɛ kunnafoni kɛrɛnkɛrɛnnenw fara a kanbɛɛ kelen kelenkartitigi : mɔgɔ kelen-kelen ka foto, tɔgɔ, baarakɛla walima kalanden nimɔrɔ, baarakɛyɔrɔ, doncogo hakɛ, ani seereyaw nimɔrɔ min bɛ kodɔn. Walasa ka ninnu komandi i mago bɛ seko ni dɔnko baara laka fara o kankunnafonidilan saniyalen (a ka c’a la CSV) ani fotow kulu min bɛ bɛn ɲɔgɔn ma. An bɛ fili minnu ye caman-caman-cikanw na, olu fanba bɛ balo o kunnafonidilan kɔnɔ, u tɛ balo seko ni dɔnko baara la.

 

Kuma surun na: ladamu kartiw ye seko ni dɔnko gɛlɛya ye; badge minnu bɛ kɛ mɔgɔ yɛrɛ ye, olu ye seko ni dɔnko baara yeanidata gɛlɛya dɔ don. Baarakɛla, kalanden ani tɔgɔla ko kɛlenw badgew bɛ kɛ mɔgɔ yɛrɛ ta ye. JɛnɛrikiRFID kartiw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago yesabu da doncogo ka teli ka kɛ ten.

 

Ka Karti ni Baara bɛn ɲɔgɔn ma

 

Sɛgɛsɛgɛli fili fanba bɛ bɔ spec dɔ kopi la min kɔrɔ ye sigida wɛrɛ ye. A daminɛ ni baara bɛna kɛ ni badge ye cogo min na tiɲɛ na.

 

Baarakɛlaw ka badgew

Don o don finidon san caman kɔnɔ, pɔnpew tali tuma caman, a jirala ko a bɛna kisi jiginɛw ni ko{0}}masin kasaaraw ma. O bɛ kɛ 30 mil karti composite la min bɛ ni donkosɛbɛn ye ani min bɛ a tanga. Da doncogo la min tɛ ɲɔgɔn sɔrɔ, MIFARE-denbaya ka seereyaw ka ca; feerekɛla dɔ bɛ se ka i ka kalanden bɛn ni jo yeMIFARE ka don kartiw.

 

Dunanw ka badgew

Lɛrɛw, sanw tɛ. Aw bɛ bɔli teliya ni kalanni bila jɔyɔrɔ fɔlɔ la ka tɛmɛ a muɲuli kan. PVC walima karti sintetiki sɛbɛnnen min bɛ ni QR kode ye min bɛ se ka don -donni ni ka taa{3}}bɔ, "VISITOR" sɛbɛn jɛman, jatigila tɔgɔ, ani a waati dafalen, o bɛ se. Aw kana lamina sara karti kan aw bɛ min fili 17h waati

 

Kalandenw ka IDw

U sigilen bɛ kɔfɛbaganw kɔnɔ, u bɛ biri, wa tuma caman na, u bɛ bolifɛnw boli gafemarayɔrɔw, dumunikɛyɔrɔw ani da la. PVC walima PET ni 30 mil ye ni minɛn min bɛ mɛn, o bɛ se ka wuli ka ɲɛ ka tɛmɛ stock finman kan. Kalanso mago bɛ fɛn minnu na, olu dɔrɔn de sɛbɛn, ani ka kunnafonidilanw minɛ minnu bɛ tali kɛ ɲɔgɔn na, i n’a fɔ fɛn minnu bɛ se ka kɛ (aw ye danbe lajɛ jukɔrɔ).

 

Kɛnɛyako badgew

Don o don-donni ko gɛlɛnba. Jɔrɔ ka kan ka kalan so kɔnɔ, karti ka saniya ni dɔlɔ walima banakisɛfagalan ye siɲɛ caman, ani a bɛ da sirilenw gosi tuma bɛɛ. PVC standard min tɛ datugu, o ka teli ka sanfɛla sɛgɛn ni a dakunw karilen jira kalo damadɔ kɔnɔ yan; PVC faralen ɲɔgɔn kan ni a datugulan ye min bɛ mɔgɔ tanga, banakisɛfagalan-muɲu ani juru min bɛ kari, o de ye jɔli ye min ka fisa. Ja labɛncogo ni departeman kulɛri kodeli bɛ teliya dɔnni na.

 

Ko kɛlenw ka seereyaw

A si hakɛ ka surun, a bɛ ye kosɛbɛ, a bɛ baara kɛ ni ɛntɛrinɛti ye kosɛbɛ. Badge minnu ka bon kosɛbɛ, olu bɛ tɔgɔ kalanni ni sponsor yɔrɔ ɲɛ. Fɛn kelen min bɛ se ka kɛ, mɔgɔw bɛ ɲinɛ min kɔ: badge glossy min bɛ jamalajɛ yeelen jɛlen jukɔrɔ, o bɛ se ka yeelen caman bɔ walasa ka se sɔrɔ QR scanning kan check-in waati, o la, fini matte bɛ a keep sɔrɔ. N’aw bɛ ka latigɛ kɛ badge hakilitigiw ni tɛmɛsira sɛbɛnnen nɔgɔmanw cɛ, aw bɛ sugandiliw jateminɛ nin lajɛ in kɔnɔRFID ko kɛlenw badgew ni sɛbɛnnikɛlan sɛbɛnw, ani selibaw walima da tugulenw kama labɛnbaga caman bɛ taa RFID ko kɛlenw bololanɛgɛw la kartiw nɔ na.

 

Mɔgɔw ​​ka kartiw

Durability tracks baarakɛcogo. Farikoloɲɛnajɛ karti min bɛ ta don o don, o mago bɛ fɛn caman na ka tɛmɛ kantigiya karti kan min bɛ kɛ kalo o kalo. Portefeuille marayɔrɔ, badge marayɔrɔ, walima key-tag format bɛɛ bɛ fɛnw sugandili Changer.

 

ID Karti hakɛ minnu bɛ kɛ ka kɛɲɛ ni sariya ye

Bonya ye desizɔn gɛlɛn fɔlɔ ye bawo a bɛ sɛbɛnnikɛlan, minɛbaga, kalanbaga ani bataki cicogo bɛnkan fɔ.

CR80 yeye default ye. O ye ID-1 cogoya ye min ɲɛfɔlen don ISO/IEC 7810 kɔnɔ: 3,375 × 2,125 in (85,60 × 53,98 mm), sennasanbara ni karti karti ye kelen ye, ni a janya tɔgɔlama ye milimɛtɛrɛ 0,76 ye. A bɛ bɛn kosɛbɛ tabali sɛbɛnnikɛlan bɛɛ ma, laminatɛri, badge minɛbaga bɛɛ, lanyard, reel, ani access reader bɛɛ, o de y’a to tigitigi a ye default lakananen ye baarakɛla, kalanden, tɔndenw, doncogo, ani lotɛli kilisi kartiw kama.

CR79 yea ka dɔgɔ dɔɔnin (3,303 × 2,051 in / 83,90 × 52,10 mm) wa a bɛ jira kosɛbɛ i n’a fɔ nɔrɔlenw-kɔfɛfɛnw ani gɛrɛgɛrɛ karti lamininenw. A tɛ dɛmɛn diɲɛ bɛɛ kɔnɔ, o la, aw bɛ sɛbɛnnikɛlan ni minɛn minɛcogo dafa sani aw ka aw yɛrɛ bila.

Mini kartiw ani key tagsbɛ bɛn denmisɛnw ka IDw ma, kantigiya porogaramuw ma, ani minɛnw taamasiyɛnw ma, nka hakɛ minnu tɛ{0}}standard ye, olu tɛ se ka sɛbɛnnikɛlanw, minɛnw, kalanbagaw, walima dilanbagaw balo. Aw bɛ ɲɛnamaya kɛcogo bɛɛ dafa fɔlɔ.

Ko kɛlenw badge minnu ka bon kosɛbɛtɔgɔ yecogo caya ani ka dugukoloko dɛmɛ nka a ka c’a la, u mago bɛ ladamu tigiw ni jurudonnaw ​​la.

 

Layidu, a ɲɛsincogo ani a kalancogo

Jamana cogoya bɛnnen don baarakɛla, tɔndenw, lotɛli, ani don kartiw ma; ja bɛ bɛn kɛnɛyako, lakɔli, ko kɛlenw ani lakana badge ma, yɔrɔ min na fotoba jɔlen ni tɔgɔ bɛ dɛmɛ ka dɔn teliya la. A ɲɛsincogo mana kɛ fɛn o fɛn ye, tɔgɔ ni foto ye fɛn fila ye minnu ka kan ka kalan ɲɛ kelen na, o la, yɔrɔ di u ma.

 

Aw bɛ kɔ mara fɛnw kama minnu man kan ka ɲɛfɛla fa: segin cikanw, bolonɔbila panɛli, magɛnni sɛrɛkili, barɔdi filanan, ani karti tununnenw ka ladɛrɛsi kunnafoniw. Ni karti minnu tɛ ɲɔgɔn sɔrɔ, aw bɛ antɛni yɔrɔ mara ani ka slot-punch yɔrɔ to yɔrɔ la min ka jan sɛbɛnni kɔrɔw la.

 

Sɛbɛnni kama, aw bɛ baara kɛ ni sans-serif ɲɛda saniyalenw ye (Arial, Helvetica, Calibri, Open Sans). Kartitigi tɔgɔ min bɛ 14–18 pt lamini na, tɔgɔw bɛ 9–11 pt lamini na, ani jɛkulu sɛbɛnni min bɛ 8–10 pt lamini na, o ye daminɛyɔrɔ ye min bɛ se ka da a kan. Sɔrɔcogo waleyali bɛ masirili gosi yan : danfaraba, sɛbɛnni tɛ kɛ kɔkanna yɔrɔw kan minnu bolo degunnen don, i jigi tɛ kulɛri dɔrɔn kan walasa ka se sɔrɔli hakɛ taamasiyɛn (ka baara kɛ ni kulɛri-fiyentɔw-pairings lakananenw ye), ani fini matte yɔrɔ o yɔrɔ la, a ka c’a la, yeelen bɛ se ka kɛ yɔrɔ o yɔrɔ.

 

Print-File labɛnnenw ɲɛfɔli

Segin-ka-bɔnye fanba bɛ bɔ seko ni dɔnko baara la, a tɛ bɔ sɛbɛnni na. Filenw jɔ ka kɛɲɛ ni nin laɲiniw ye:

 

• Joli bɔli: .0,125 in / 3 mm fan bɛɛ fɛ o la kɔkanna seko bɛ boli ka tɛmɛ trim kan.
• Yɔrɔ lakananen:sɛbɛnni ni logow mara 0,125 in / 3 mm kɔnɔ trim da la.
• Ŋaniya:300 DPI ka dɔgɔn.
• Kulɛri cogoya:CMYK, a tɛ RGB - ye ka marka kulɛri dɔ sɛmɛntiya ka bɔ RGB la tiɲɛ kɔfɛ, o ye kulɛri jiginni bɛ kɛ yɔrɔ min na.
• Nkɔni radiyali:a ka c’a la 1/8 in / 3,18 mm.

 

Ni CR80 ye 300 DPI la, karti dafalen bɛ 1013 × 638 px ɲɔgɔn na, a bɛ se 1088 × 713 px ma ni joli ye, ni yɔrɔ lakananen ye 938 × 563 px kɛrɛfɛ. Logow di i n’a fɔ vecteur (AI, EPS, SVG) ani ka sɛbɛnni dosiyew ci i n’a fɔ PDF/X-1a walima PDF high-resolution; TIFF ni high-resolution PNG bɛ Sɔn raster ma. Aw ye aw yɛrɛ tanga JPEGw ni ekran ja minnu ka dɔgɔn.

 

Jaw ka kan ka kɛ 300 × 300 px (kɛrɛnkɛrɛnnenya la, o ka fisa), yeelen ka kan ka kɛ kelen ye ni kɔkanna jɛlen ye, ɲɛda cɛmancɛ bɛ kɛ 60–80% ɲɔgɔn na karamɔgɔ janya la. CR80 badge kan, ja min bɛ 1,0–1,25 in lamini na a bonya ni 1,25–1,5 in janya bɛ dɔnniya ɲuman di ka sɔrɔ ka yɔrɔ to sɛbɛnni kama.

 

Fɛnw ni u bonya - ani waati min na aw man kan ka baara kɛ ni PVC ye

A janya kunkurunnin na: 10 mil ye taamakɛlaw ka badge fililenw ye, 20 mil ye yeelen-baara kɛ ni tɔndenw ka kartiw ye,30 mil ye don o don sariya yebaarakɛlaw ka IDw kama, ani 40–50 mil ka ɲɛsin baara gɛlɛnw-baarakɛlaw ka kartiw ma walima izini kartiw kama.

PVC yeye fɛn ye min bɛ kɛ ka daminɛ: a sɔngɔ ka nɔgɔn, a bɛ sɛbɛnni kɛ ka ɲɛ, a bɛ bɛn sɛbɛnnikɛlan bɛɛ ma, wa a ka ɲi ka baara kɛ ni a ye so kɔnɔ. A komandi i n’a fɔ sariyaPVC RFID kartika ɲɛsin baarakɛlaw ni tɔndenw ka porogaramuw ma minnu bɛ kɛ cogoya la. Nka ni karti bɛna gosi walima ka sɔgɔ ka tɛmɛ siɲɛ mugan ɲɔgɔn kan tile kɔnɔ, walima ni a bɛ balo kɛnɛma, walima ni a ko ni kemikɛlifɛnw ye, PVC jɛlen min tɛ datugu, a ka c’a la, o ye sugandili jugu ye - a bɛ kari a dakunw na ka sɔgɔsɔgɔ a sanfɛla la joona ka tɛmɛ sannikɛlaw bɛ miiri min na.

 

PVC min bɛ kɛ ɲɔgɔn fɛ(PVC min ɲagaminen don ni poliyesitɛri ye) bɛ funteni ni wulicogo kɛlɛ ka ɲɛ, a bɛ kisi lamination ni retransfer sɛbɛnni ma, wa a bɛ mɛn ka tɛmɛ - sɛgɛsɛgɛli hakilitigi kan don kartiw ni don o don{1}}wear badges.PET/PETG yeaw bɛ ji, tile yeelen ani kɔrɔtacogo minɛ ka ɲɛ, o bɛ bɛn lakɔlisow ma, bolifɛnw ani kɛnɛma baara ma.Polikarbonati (Polikarbonati) yeye sugandili ye min ka lakana ka bon, min ka jan-: a bɛ laser ja ni sɛgɛsɛgɛli barikama dɛmɛ, a musaka ka ca, wa a bɛ sɔrɔ gɔfɛrɛnaman ni lakana-yɔrɔ seereyaw la.

 

Finishes ani Lakanali

Gloss bɛ i ko a ɲɛnama don nka a bɛ bolokɔnincininw ni sɔgɔsɔgɔninjɛw jira ani a bɛ se ka scanning glare dilan. Matte bɛ dɔ bɔ ɲɛnayeli ni bolokɔniw na ani ka to ka barɔdi ni QR kalan - ɲɛ ka taa a fɛ kɛnɛyako ni badge fɛn o fɛn bɛ ni kode skanlen ye. Lakanali dacogo walima laminati bɛ dɔ fara sɔgɔsɔgɔninjɛ, UV, ji, ani kemikaliw kɛlɛli kan ani ka kɔrɔ ka ɲɛnamaya janya kartiw la minnu bɛ minɛ tile bɛɛ kɔnɔ. Kɛnɛma porogaramuw (so jɔli, bolifɛnw jɔli, foro baara) ka kan ka UV-resistant overlays (UV-resistant overlays (UV-resistant overlays) ɲɛfɔ walasa ka fani bali, ani sigida jilamaw walima izini sigidaw bɛ nafa sɔrɔ ni dakunw datuguli ye walima ni bolokɔniw ye minnu tɛ ji bɔ.

 

Kodeli: Barcodes, Magstripe, RFID, NFC ani Smart Cards

Masina-kalan fɛɛrɛ ye yɔrɔ ye "a ɲɛ ka ɲi" ani "a bɛ baara kɛ n'an ka kalanden ye" bɛ danfara don, o la nin yɔrɔ in ka kan ni jateminɛ ye kosɛbɛ.

 

Barcodes ani QR codew

A sɔngɔ ka dɔgɔ ani a nɔgɔn don taamakɛlaw ɲɛnabɔli la, ko kɛlenw sɛgɛsɛgɛli-donni, nali la, ani gafemarayɔrɔ ɲininiw na. Kode 39 ni Kode 128 ye fɛn ye min bɛ kɛ tuma bɛɛ; QR bɛ kunnafoni wɛrɛw ta. Jago-off ye lakana ye: kode sɛbɛnnenw tɛ fosi ye ka foto ta ani ka kopi kɛ, o la u bɛ bɛn dantigɛli ni nɔgɔya ma, u tɛ bɛn lakanani sɔrɔli sanfɛ-.

 

Bandi magnétique (magnetiki) ye

Dɛmɛ min musaka ka dɔgɔ ani min ka bon, nka a bɛ farikoloɲɛnajɛ kɛ, a bɛ don ni baara ye, wa a bɛ lakana barikama di ka tɛmɛ bi seereyaw kan minnu tɛ ɲɔgɔn sɔrɔ. Aw b’a mara tuma min na aw ka sigida kɔrɔ bɛ a la hali bi; kana a fara jɔli kura kan k' a sɔrɔ kun t' a la .

 

RFID ni NFC - kunnafoni minnu bɛ bɛnkan latigɛ

 

 

13,56 MHz kɔnɔ, karti bɛɛ tɛ kelen ye.MIFARE Klasikia jɛnsɛnnen don ani a musaka ka dɔgɔ-nka a lakanani donna ani a UID bɛ se ka kɛ clone ye ni kopikɛlan sɔngɔ gɛlɛnw ye; a ka ɲi -stakes baarakɛcogo dɔgɔmanw na ani farati bɛ fɛn o fɛn na min bɛ se ka kɛ fɛn ye.MIFARE ƝƐNABƆLI (EV2/EV3) .bɛ AES sirili ni ɲɔgɔndɛmɛ dɛmɛ ani o ye sugandili nafama ye ni seereyaw bɛ fɛn dɔ lakana min nafa ka bon ka lakana. Ka kɛ "13.56 MHz" ye, o tɛ garanti ye ko karti fila bɛ se ka ɲɔgɔn falen - puce suguya ni configuration ka kan ka bɛn hali bi.

 

Karti hakilitigiw

Karti hakilitigi minnu tɛ ɲɔgɔn sɔrɔ ani minnu tɛ ɲɔgɔn sɔrɔ, olu bɛ dantigɛli sirilen, mara lakananen, ani baarakɛminɛn caman dɛmɛni fara ɲɔgɔn kan walasa ka baarakɛyɔrɔw don, ka don hakili la, ani ka baara kɛ ni fɛn caman ye. U musaka ka ca nka u bɛ don ɲɔgɔn na ka ɲɛ waati jan-waati la. Walasa ka kan gansan-kan daminɛ, aw ye nin ɲɛfɔli in lajɛRFID smart card bɛ baara kɛ cogo min na. Kunnafonidila-ɲɛnajɛ fan fɛ, o 13,56 MHz fɛɛrɛ kelen in bɛ fanga di NFC viziti kartiw ma minnu bɛ se ka porogaramu.

 

Sɔrɔdasi kɔlɔsili bɛnkan - dafa sani i ka komandi kɛ

Karti kodɔn min tɛ da wuli, o ye rollout killer ye. Sani i ka komandi kɛ, i ka kalanden suguya n’a kɛcogo sɛgɛsɛgɛ, puce tigitigi, theizini kodeanikarti nimɔrɔ cogoya, ani ɲɔgɔndan. Fɛn fila minnu bɛ mɔgɔw lafili:

N’i ​​bɛ ka sistɛmu kɔrɔ dɔ bila a nɔ na, ​​komandi kɛli ka taa cogo dɔnta la, o ye a yɛrɛ ka baara ye - nin taama in komandi kanHID Prox-karti minnu bɛ se ka baara kɛ ɲɔgɔn fɛbɛ kunnafoni minnu ɲɛfɔ, feerekɛla mago bɛ minnu na. Fɛɛrɛ mana kɛ fɛn o fɛn ye, ka misali kartiw kɔrɔbɔ i ka donko kɔlɔsili kalanbaga lakikaw kan sani u ka baara dafalen kɛ - a ka fisa karti caman kalanbaga caman kɔnɔ, ka kalanni dannamɔgɔ ni donko latigɛcogo ɲuman fila bɛɛ lajɛ.

 

Lakanali ka kɛɲɛ ni Nivo ye, a tɛ kɛ ka kɛɲɛ ni Feature ye

Ka anti-nɛgɛjuru kɛcogo bɛɛ jate, nafa tɛ o la; ka minnu bɛnnen don i ka farati la, olu fara ɲɔgɔn kan, o ye. Layer yelenw, dogolenw ani ɛntɛrinɛti fɛɛrɛw sanni ka da fɛn kelen si la.

• Basic (a musaka ka dɔgɔ, ID yelen):foto, nimɔrɔ minnu bɛ tugu ɲɔgɔn na, a dafalen don, QR walima barɔdi. A bɛ baara jugu kɛ cogo la min tɛ kɛ tuma bɛɛ, o bali.
• Medium (baarakɛlaw ka sɛgɛsɛgɛli):sanfɛ ka fara olografu dabɔlen kan, jinɛ ja, UV-fluorescent enki, ani seereyaw sirilen min tɛ se ka ɲɔgɔn sɔrɔ. A bɛ lakana baarakɛlaw bila ka karti dɔ sɛgɛsɛgɛ segin kɔnɔ ni UV yeelen ye ani ni a kɔrɔtalen ye.
• Sanfɛ (yɔrɔ lakananenw):stock composite walima polycarbonate stock, DESFire walima smart-card encryption, microtext, tamper-laminate jɛlen, bɔli kɔlɔsili, ani sɛbɛnw bɔli. Nin ye tier ye min bɛ bɛn ni seereyaw porogaramu fɔlɔw ye.

Foro lajɛ teliya la baarakɛlaw ye : ka foto ni mɔgɔ suma ɲɔgɔn na, ka jɔyɔrɔ ni waati dafalen dafa, ka ologramme kɔrɔta, ka UV lajɛ ni a bɛ yen, ka laminati sɛgɛsɛgɛ ni a bɔra a la, o kɔfɛ ka seereyaw sɛgɛsɛgɛ. Sɛgɛsɛgɛli teliya caman bɛ se ka i jigi da fɛn kelen kan.

 

Accessoires ani Slot-Punch Ladilikan

Holder ni attachment sugandili bɛ nɔ bila ɲɛnamaya la i n’a fɔ fɛnw. Breakaway lanyards bɛ bɛn kɛnɛyako ma, lakɔlisow ani fɛn dilanni ma; badge reels bɛ bɛn birow ma ani ka to ka tap; bulldog clips bɛ bɛn waati dɔɔnin taamakɛlaw ka kartiw ma; fɛntigi gɛlɛnw bɛ baarakɛlaw ka kartiw lakana minnu bɛ mɛn-; bololanɛgɛ minnu tɛ ji la, olu bɛ bɛn ji la walima kɛnɛma baara ma.

 

Sariya kelen min ka kan ka segin a kan:kana slot-punch RFID, NFC, walima magstripe karti la sani i ka a jira ko antɛni, puce ani stripe sigilen bɛ yɔrɔ min na.Ameriki ka slot punch standard bɛ 0,5 × 0,125 in (12,7 × 3,2 mm) ɲɔgɔn bɔ, a ka c’a la, a cɛmancɛ bɛ kɛ horizontalement 0,25 in / 6 mm ɲɔgɔn sanfɛ sanfɛla da - jukɔrɔ ani punch min bɛ tɛmɛ antenne embedded fɛ, o bɛ karti tiɲɛ ni dususuma ye. Aw bɛ a labɛncogo dafa ni aw ka feerekɛla ye sani aw ka batch dɔ punch.

 

Sɛbɛnni kɛcogo minnu bɛ kɛ

Dye-sublimation ye don o don fɛɛrɛ ye baarakɛlaw, kalanden ani tɔndenw ka kartiw kama: foto teliya, foto ɲuman, ani musakabɔ tabali sɛbɛnnikɛlanw kan. Retransfer (HDP) bɛ sɛbɛnni kɛ filimu kɔnɔ k’a fara ɲɔgɔn kan ka don karti la, ka danyɔrɔ lakika-to-dakun datugucogo di ani ka nɔ ɲumanw di karti hakilitigiw ni RFID kartiw yɔrɔw kan minnu tɛ kelen ye - o de y’a to a ka fisa ni seereyaw ye minnu ka fisa ni seereyaw ye minnu ka bon ani minnu ka bon. Direct-to-karti sɛbɛnni ye musaka-nafa ye nka a ka teli ka dan finman dɔ to min ma sɛbɛn, o la a barika ka dɔgɔ joli dafalen-dilancogo la. Laser-jatebɔ polikarbonati kan, o bɛ kɛ sababu ye ka mɔgɔya kɛcogo banbali, min tɛ se ka fɛn tiɲɛ-gofɛrɛnaman ka-kartiw kama.

 

In-so kɔnɔ walima kɛnɛma baara?

-so kɔnɔ sɛbɛnni bɛ a ka mara sɔrɔ n’i ye kartiw di tuma bɛɛ ani i mago bɛ tile kelen{1}}don caman cili la, karti kura-baarakɛlaw ni taamakɛlaw ka kartiw, ani kunnafoni nafamaw kɔlɔsili - sɛbɛnnikɛlan, bandi, ladonni, ani baarakɛla ka waati musakaw la. Outsourcing bɛ se sɔrɔ unit musaka kan volume, consistent color, lamination professionnelle, chip encoding, holographie security, ani packaging ka kɛɲɛ ni departeman walima site ye.

 

Sariya min bɛ kɛ tuma bɛɛ, o ye ko baarakɛlaw ka baara kɛli "bɛ nɔgɔya ka jo di" ni san ɲinini sera karti 1000–2000 ɲɔgɔn ma - nka aw k’o jate daminɛ ye, aw kana kɛ sariya ye. Lafiɲɛbɔ lakika-hali bɛ bɔ baara musakaw la, karti gɛlɛya la, ani n’i mago bɛ kodɔn walima ologramuw la i tɛ se ka minnu dilan-so kɔnɔ. Jɛkulu caman bɛ baara kɛ ni ɲɔgɔndan ye : ka san boliba in di kɛnɛma, ka tabali sɛbɛnnikɛlan dɔ mara walasa ka fɛnw bila u nɔ na ani ka taa bɔ u ye. N’i ​​bɛ ka sɛbɛnnikɛlan dɔ bonya, nin jateminɛba inkarti sɛbɛnnikɛlan sugandicogoye daminɛ nafama ye, wa n’i b’a latigɛ ni i bɛna kɔn ka sɛbɛnni kɛ walima ni i bɛna sɛbɛnni kɛ ka kɛɲɛ ni ɲinini ye, i ka ɲɔgɔn sangablank ni RFID karti minnu sɛbɛnna ka kɔn-.

 

Sannifeere, waati min bɛ kɛ, ani fɛn min bɛ musaka bila tiɲɛ na

Unit sɔngɔ bɛ jigin ni hakɛ ye, ka wuli ni gɛlɛya ye. Musow ka musaka kunbabaw ye fɛnw ni u bonya ye, fan kelen- ni fan fila-kɛrɛfɛ ani dafalen-kulɛri ni kulɛri kelen sɛbɛnni, kunnafonidilanw ni fotow kɛcogo caman ɲɔgɔn na, kodeli (magstripe, RFID, NFC, walima smart chip), lakanafɛnw (hologrammes, UV, microtext), lamination, slot punching, accessoires, rush production, ani shipping.

 

I n’a fɔ dusukunnata gɛlɛn, misali min bɛ Ameriki sugu la -.ranges bɛ danfaraba don ka kɛɲɛ ni fournisseur ni specification ye, o la aw ka ninnu minɛ i n’a fɔ ballpark, aw kana kɛ quote ye- PVC karti sɛbɛnnen gansan bɛ jigin tuma caman na dɔrɔmɛ kelen-yɔrɔ dɔgɔman na ni hakɛ fitininw ye, ka jigin ka taa dɔrɔmɛ jukɔrɔ kosɛbɛ ni unit ba caman ye. Fɛnɲɛnɛmako min tɛ ɲɔgɔn sɔrɔ, o ye faraliba ye-kan na: 125 kHz walima 13.56 MHz basigilen seere bɛ a ka c’a la, a bɛ dɔ fara a kan -karti sɔngɔ fitinin dɔ kan, k’a sɔrɔ DESFire walima karti kodɔn dafalen smart- bɛ dɔ fara a kan. Holographie overlays, custom lamination, ani rush fees kelen-kelen bɛɛ bɛ musaka fara a kan. Ladilikan lakika ye ka sɔngɔ sɔrɔaw taspec tigitigi ni volume; baarakɛla ka boli min bɛ kɛ ni kariti 500 ye ani boli min bɛ kɛ ni kariti 5000 ye, olu ye baro suguya wɛrɛw ye.

 

Waati kan, a ka c’a la, baarakɛcogo jɔnjɔn bɛ kɛ baarakɛdon 5–10 kɔnɔ, seko ni dɔnko baara ni kunnafoniw sɔnni kɔfɛ, wa kɔrɔtɔ baara min bɛ kɛ baarakɛdon 1–3 kɔnɔ, o bɛ sɔrɔ tuma caman naka ɲɛsin PVC karti sɛbɛnnen nɔgɔmanw ma- kodɔn, lamini, ani lakana fɛɛrɛw bɛ o bonya. Waati bolodacogo dafa ka kɛɲɛ ni i ka fɛn ɲɛfɔcogo yɛrɛ ye sanni ka kɛ ni kunnafoni kunbaba nimɔrɔ ye.

 

Gundolakow ani sariya labatoli

Kartiw bɛ mɔgɔ yɛrɛ ka kunnafoniw ta, wa tuma caman na, u bɛ don sistɛmu kɔrɔw la, o la sa, i mago bɛ fɛn minnu na, olu dɔrɔn de bɛ sɛbɛn ani k’u mara. Sekirite Sosial nimɔrɔw, furakɛli kunnafoniw, ani mɔgɔ yɛrɛ ka kunnafoniw minnu tɛ mako ɲɛ, olu tɛmɛn; jɔyɔrɔ-kunnafoni minnu sinsinnen bɛ a kan, olu ka fisa; ɛntɛrinɛti kan seereyaw siri yɔrɔ minnu na a bɛnnen don; CSV filew ni fotow kunnafonidilanw lakana porogaramu kɔfɛ; ani ka karti tununnenw bɔ yen joona.

 

Sekɔrɔ sariyaw bɛ sirataama. Kɛnɛyako porogaramuw bɛ kunnafoni lakananenw ɲɛnabɔ HIPAA kɔnɔ, min bɛ mara Ameriki kɛnɛyako ni hadamadenyako minisiriso fɛ, o la sa, dan sigi badge bɛ fɛn minnu bɔ kɛnɛ kan, ani ka sɛbɛnw lakana minnu bɛ tali kɛ ɲɔgɔn na. Lakɔlisow bɛ kalandenw ka kunnafoniw ɲɛnabɔ FERPA kɔnɔ, o kɔrɔ ye k’u janto kalandenw ka nimɔrɔw la, fotow la, ani kafetiri, gafemarayɔrɔ walima bolifɛnko sira o fɛɛrɛ la, karti bɛ maga min na. Gofɛrɛnaman ni lakanani-yɔrɔ porogaramuw bɛ se ka mago don bɔli la cogo labɛnnen na, kunbabaw ɲɛnabɔli la, ani ka bɔli kɛ ka kɛɲɛ ni NIST FIPS 201 (PIV) ye. Ni aw bɛ baara kɛ ni biometriki ye, aw ye fédéral ni état sariyaw lajɛ minnu bɛ sirataama sɔnni, a marali ani a marali kan sani aw ka baara kɛ.

 

Commander Process, Taabolo kelen-kelen bɛɛ

• A’ ye fɛn ɲɛfɔcogo ɲɛfɔ.Karti suguya, a hakɛ, a bonya, a bonya, a kɛcogo, a ɲɛsincogo, a kɛrɛw, a laban, a kodɔnni, a lakananifɛnw, a kɔnɔfɛnw, ani a waati dantigɛlen.
• Seko ni dɔnko baara labɛn.A hakɛ bɛnnenw ni joli ni lakana yɔrɔ ye, CMYK ni 300 DPI ye, vektɔri logow, ani sɛbɛnnibolo minnu ɲɛfɔlen don walima minnu bɛ don a kɔnɔ fan fila bɛɛ la.
• Donanw labɛn minnu bɛ ɲɔgɔn falen-falen.Ni aw b’a fɛ ka badgew sɔrɔ minnu bɛ kɛ aw yɛrɛ ye, aw bɛ CSV saniyalen dɔ ci ni baarakɛla ID ye, tɔgɔ fɔlɔ ni tɔgɔ laban, baarakɛyɔrɔ, tɔgɔ, waati tɛmɛnen, barɔdi nafa, RFID karti nimɔrɔ, doncogo hakɛ, ani foto filen tɔgɔ min bɛ bɛn o ma. Nin yɔrɔ in de la, komandi caman bɛ kɛ cogo jugu la, o la, aw bɛ a sɛmɛntiya ka ɲɛ (aw ye filiw lajɛ jukɔrɔ).
• Segin dalilu dɔ kan.Aw ye dalilu nimɔrɔ walima farikolo taasibila ɲini ani ka a labɛncogo, kulɛri, logo jɛlen, foto jɔyɔrɔ, sɛbɛnni, barɔdi ani QR sɛgɛsɛgɛli, kodɔn baarakɛcogo, finidon, ani slot-punch jɔyɔrɔ lajɛ.
• Sɔn ani ka a labɔ.Ni komandibaw bɛ kɛ, aw k’a ɲininka ni kartiw bɛ se ka tila ka kɛɲɛ ni baarakɛyɔrɔ, yɔrɔ walima doncogo hakɛ ye.
• Aw bɛ a sɛgɛsɛgɛ jiginni waati.Aw bɛ hakɛ, sɛbɛnni cogoya, mɔgɔya tiɲɛni, baarakɛcogo kodɔnlen sɛgɛsɛgɛ kalanbaga caman kɔnɔ, fɛn wɛrɛw, ani cikan cogoya la sani aw ka tila.

1.  

Donanw ka dosiye caman labɛnni

Walasa ka boliba dɔ kɛ min kɛra mɔgɔ yɛrɛ ta ye - a fɔ ko 3000-karti baarakɛla rollout - seko ni dɔnko baara ye yɔrɔ nɔgɔn ye. CSV kulu komandi datugu ani k’a tila ni feerekɛla ye sani i ka taa ni a ye, walasa koloma min jiginna, o kana se ka foto jugu ni tɔgɔ jugu fara ɲɔgɔn kan makun na. A jira ko foto tɔgɔladonni bɛnkan bɛ bɛn CSV kilisi ma tigitigi. A latigɛ yɔrɔ lankolonw ni taamasiyɛn kɛrɛnkɛrɛnnenw bɛ minɛ cogo min na. Ani ka misali surun dɔ ɲini ka kɔn a dilanni ɲɛ, min bɔra kunnafonidilan lakikaw la, a kana bɔ yɔrɔ sɛbɛnni na, o la, karti filiw bɛ bɔ karti tan kan sanni ka kɛ ba saba ye.

 

Misali minnu ka teli ka kɛ, an ka kan ka minnu kɛ

• Karti kodɔnlenw komandi sani i ka kalanden dafa.Puce ɲuman, facility code jugu walima bit format, ani foyi tɛ da wuli.
• Slot-punching ka tɛmɛ antenne fɛ.Aw bɛ puce ni antenne jɔyɔrɔ sɛgɛsɛgɛ fɔlɔ.
• CSV koloma drift.Kolon kelen min ma bɛn ɲɔgɔn ma, o tɛ tɔgɔw, fotow ani ID nimɔrɔw bɛn ɲɔgɔn ma kulu bɛɛ kɔnɔ.
• QR walima barcode min bonya ka dɔgɔ.Aw k’a sɛbɛn ka dɔgɔ kojugu, walima k’a yeelen bɔ yeelenba kɔrɔ, ani ka a lajɛ-skanɛrɛw ma ɲɛ.
• RGB ka seko ni dɔnko.Yɛlɛma donna CMYK la late shifts brand kulɛriw; dilancogo CMYK kɔnɔ kabini a daminɛ na.
• PVC jɛlen don don o don don gɛlɛnw kama.Ni i ye karti dɔ kan min bɛ datugu siɲɛ tan ni caman tile kɔnɔ, o bɛ tɛmɛ o kan, o bɛ a jira ko i bɛ se ka fɛn wɛrɛ bila a nɔ na joona.
• Ka tɛmɛn misali sɛgɛsɛgɛli kan.Ka sɔn dalilu digitɛri ma, o ni karti lakika digi kalanbaga lakika kan, o tɛ kelen ye.

 

Kɛrɛnkɛrɛnnenya la, sɛgɛsɛgɛli sɛbɛn min ka kan ka ci ni i ka RFQ ye

Ni i ye ninnu jaabi sani i ka quotation ɲini, o bɛ sɔngɔ tigitigi sɔrɔ ani kabako dɔɔnin: karti suguya ni a hakɛ; bonya ni a bonya; minɛ; ɲɛsincogo ani fan kelen/fila-; fini walima lamination; barɔdi, QR, magstripe, RFID, NFC, walima smart puce (ni kalanbaga suguya, frequency, puce, facility code, ani format ni a kodɔnna); lakanani fɛɛrɛw wajibiyalenw; slot punch ni fɛn wɛrɛw; sɛgɛsɛgɛli ni pakew dilanni magow; ani jiginni waati dantigɛlen. Lakanali-porozɛw kama minnu bɛ se ka kɛ, aw ye misali kartiw ɲini ani ka a jira ko feerekɛla bɛ se ka bɛn aw ka donko kɔlɔsili cogoya ma sani aw ka sɔn boli dafalen ma.

 

Teliya-Pick Configurations

• Biro baarakɛla ID:CR80, 30 mil PVC composite, full-kulɛri ɲɛfɛ, foto ni tɔgɔ, RFID walima QR, matte overlay, bobine walima lanyard.
• Dɔgɔtɔrɔso ka badge:CR80 ja, PVC jɛlen, banakisɛfagalan-muɲu dafalen, jɔyɔrɔba-danfaralenba ani kulɛri kodeli, RFID sirilen, sirilan min bɛ kari.
• Kalanden ka ID:CR80, 30 mil PVC walima PET, foto ni kalanden nimɔrɔ, gafemarayɔrɔ QR walima barɔdi, minɛn min bɛ mɛn.
• Dunanw ka badge:PVC waati dɔɔnin walima sintetiki, "VISITOR" taamasiyɛnba, jatigila ani waati tɛmɛnen, QR for check-in, clip.
• Ko kɛlenw ka badge:oversized walima CR80, tɔgɔba, sponsor yɔrɔ, matte fini, QR, lanyard.
• Lakanali sɔrɔli sanfɛ-:composite walima polycarbonate, DESFire walima smart chip, holographie laminate ka fara UV walima microtext kan, bɔli kɔlɔsili, sample-kɔrɔbɔli sani a ka bɔ.

 

Sosow ni sariyaw minnu kofɔlen don

Nin gafe in bɛ tali kɛ sariyaw bɔlenw ni laadilikanw na minnu bɛ kɛ fanga fɛ : ISO/IEC 7810 ka ɲɛsin karti hakɛw ni farikolo cogoyaw ma ; NIST FIPS 201-3 (PIV) ka ɲɛsin fédéral ka seereyaw wajibiyalenw ma; SIA Open Supervised Device Protocol (OSDP) min bɛ kɛ ka donko kɔlɔsili kumaɲɔgɔnya lakananen sɔrɔ; ani mɔgɔ dogolenw bilasiralikan minnu bɛ bɔ HHS HIPAA porogaramu la ani Ameriki kalanko minisiriso ka kalandenw ka danbeko biro la.

 

Ɲininkali minnu bɛ kɛ tuma caman na

ID karti minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu hakɛ ye mun ye?

CR80, ISO/IEC 7810 ID-1 cogoya: 3,375 × 2,125 in (85,60 × 53,98 mm), o ni karti bonya ye kelen ye. A bɛ se ka kɛ ko a bɛ bɛn sɛbɛnnikɛlan, kalanbaga, waribɔlan, minɛn ani doncogo bɛɛ ma.

 

Baarakɛla ka ID ka kan ka kɛ janya jumɛn ye?

30 mil (0,76 mm ɲɔgɔn) ye sariya ye, min bɛ balansi kɛ muɲuli, sɛgɛsɛgɛli, ani kalanbagaw ka bɛnkan. Aw bɛ taa PVC composite la min janya ye kelen ye walasa ka don o don don gɛlɛnw don.

 

Ne ka kan ka filen cogoya jumɛn ci walasa ka sɛbɛnni kɛ?

PDF/X-1a walima PDF min ka bon-, o ka ɲi kosɛbɛ, ni AI, EPS, TIFF, walima PNG ye min ka bon kosɛbɛ, o sɔnna. Aw bɛ baara kɛ ni 300 DPI, CMYK, vektɔri logow, sɛbɛnnibolow ye minnu ɲɛfɔlen don, ani ka joli ni yɔrɔ lakananen dɔ fara a kan.

 

Yala ne ka kan ka sɛbɛnni kɛ -so kɔnɔ walima ka baara kɛ kɛnɛma wa?

In-so bɛ bɛn teliya bɔli ma, batɛmu misɛnninw, ani fɛn falenw. Outsourcing bɛ bɛn bolibaw ma, encoding, holographie lakanani, ani lamination consistente. Porogaramu caman bɛ o fila bɛɛ kɛ.

 

Yala RFID ni NFC ye fɛn kelen ye wa?

NFC ye 13,56 MHz RFID kulu fitinin ye min dabɔra kumaɲɔgɔnya surun-sira fila-siraw kama. NFC bɛɛ ye RFID ye, nka RFID bɛɛ tɛ NFC ye - 125 kHz gɛrɛgɛrɛ kartiw, misali la, u ye RFID ye nka NFC tɛ.

 

Yala karti minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka kɛ RFID, NFC, walima puce hakilitigiw ye wa?

Ɔwɔ - ka fara magstripe, barɔdi, ani QR kan. Sani i ka komandi kɛ, i ka kalanden suguya, frequency, puce, facility code, card format, ani encryption wajibiyalen fɛn o fɛn sɛgɛsɛgɛ, o kɔfɛ, i ka samples kɔrɔbɔ.

 

Fɛn jumɛn de bɛ mɛn kosɛbɛ?

PVC ka ɲi so kɔnɔ; PVC composite bɛ funteni ni sɛgɛnbaliya fara a kan; PET/PETG bɛ ji ni kɔrɔta minɛ; polikarbonati ye sugandili ye min lakananen don kosɛbɛ, min bɛ mɛn{1}}.

 

A dilanni bɛ waati joli ta?

A ka c’a la, baarakɛdon 5–10 seko ni dɔnko ni kunnafoniw sɔnni kɔfɛ, ni kɔrɔtɔ baara ye baarakɛdon 1–3 ye tuma caman na PVC sɛbɛnnen nɔgɔmanw kama. Encoding ni lakana fɛɛrɛw bɛ waatibolodacogo janya.

 

Ne bɛ se ka filiw bali cogo di komandi caman na?

CSV kuluw sigicogo datugu, ka fotow filen tɔgɔw bɛn donanw kilisi ma, ka misali ɲini ka bɔ kunnafonidilan lakikaw la, ka karti kodɔnlenw kɔrɔbɔ i ka kalanbagaw kan, ani ka batch dilen sɛgɛsɛgɛ sani i ka kartiw di.